LabelScope
These instructions are for users already familiar with LabelScope. If you haven't already, please read the LabelScope Manual.
All Receipt Printers supported by LabelScope feature programmable image memory. LabelScope can program one image per receipt printer. When programmed, the receipt printer can print the image very quickly. More importantly, the same image can be recalled using other programs that support the receipt printer.
Programming Basics
To program a receipt printer, use LabelScope to print the image you want to program. When you are satisfied with the result, click the "Printer" menu and then choose "Save Memory" or press command + s. After a few seconds the printer may beep or blink. The printer is now programmed with the image. Recall the programmed image by clicking the "Printer" menu and then choose "Print Memory" or press command + r. The image will print without spooling.
